22350.1963 - Locating Bushing with Seal, plain
for lifting pins
The seal prevents the penetration of liquid and dirt. The bushing is therefore especially suitable for use in the open air.
Locating bushings are used for quick and safe locating of lifting pins EH 22350 / EH 22351.
This design is suitable for applications which require installation flush to the surface.
A face wrench is required for installation. As an accessory, we offer a standard adjustable face wrench, offset, and a face and socket wrench. In combination with a socket-wrench/screwdriver, the face and socket wrench is especially suitable for use if space is restricted.
Corrosion and abrasion resistant.
This article 22350.1963 - Locating Bushing with Seal, plain for lifting pins / (d1 H11: 16 mm, d2: M30 x 2 mm, For nominal length: 25 mm) is one variant of the article group Locating Bushings with Seal, plain for lifting pins (EH 22350.)
- d1 H11: 16 mm
- d2: M30 x 2 mm
- For nominal length: 25 mm
- d3 -0.2: 39 mm
- d4 +0.3: 19.3 mm
- d5 +0.1: 5.1 mm
- l1: 78 mm
- l2: 72 mm
- l3: 30 mm
- l4: 33 mm
- Tightening torque max.: 200 Nm
- x: 1.5 mm
- Load capacity F1: 4.8 kN
- Load capacity F2: 4.5 kN
- Load capacity F3: 4.1 kN
- For lifting pin: 22350.0641 / .0741
- Weight: 253 g
adjustable face wrench, offset
: adjustable face wrench, offset
Suitable for size d1: 10 mm/12 mm/16 mm/20 mm/25 mm
- adjustable face wrench, offset
- Suitable for size d1: 10 mm/12 mm/16 mm/20 mm/25 mm
- Pin diameter -0.1: 5 mm
- Weight: 309 g
face wrench (socket wrench insert)
: face wrench (socket wrench insert)
Suitable for size d1: 16 mm/20 mm
- face wrench (socket wrench insert)
- Suitable for size d1: 16 mm/20 mm
- Pin spacing ±0.1: 30 mm
- Pin diameter -0.1: 5 mm
- Weight: 243 g
- Square drive: 1/2 in
Material
Bushing
- Stainless steel 1.4542, precipitation-hardened
O-ring
- NBR
Spring
- Stainless steel
Assembly
Safe tolerances and consistent function.
Easily incorporated into different materials
Bush can be easily installed via optional assembly tool.
Can be mounted in blind holes.
For thin-walled parts, lock nuts are used for assembly.
RoHS compliant
Compliant according to Directive 2011/65/EU and Directive 2015/863.
Does not contain SVHC substances
No SVHC substances with more than 0.1% w/w contained - SVHC list [REACH] as of 27.06.2024.
Does not contain Proposition 65 substances
No Proposition 65 substances included.
https://www.P65Warnings.ca.gov/
Free from Conflict Minerals
This product does not contain any substances designated as "conflict minerals" such as tantalum, tin, gold or tungsten from the Democratic Republic of Congo or adjacent countries.