22150.0415 - Lateral Plunger
with thread, with seal
To be used for positioning and applying pressure, e.g. during painting and sandblasting.
Sealed against chips and dirt.
This article 22150.0415 - Lateral Plunger with thread, with seal / Standard spring load (d1: M12, l1 -2: 19 mm, Spring load F max.1: ~ 50 N) is one variant of the article group Lateral Plungers with thread, with seal (EH 22150.)
More details
- Pin: Steel/Standard spring load
- d1: M12
- l1 -2: 19 mm
- Spring load F max.2): ~ 50 N
- d2: 5 mm
- l2: 6 mm
- Stroke s: 0.8 mm
- WS: 10 mm
- x1): 1.7 mm
- Operating temperature range max.: 110 °C
- Weight: 6.3 g
for lateral plungers
d1: M12
- assembly tool
- d1: M12
- Weight: 76 g
Material
Seal
- CR
Body
- Steel, zinc-plated by galvanization
Spring
- Steel, blackened
Pin
- Steel, case-hardened, zinc-plated by galvanization
Characteristic
Version standard spring load = spring from steel, blackened
Assembly
Lateral plungers are installed by screwing in by means of a mounting tool.
Formula for calculating the center distance for the mounting hole:
l0 = z/2 + w + x,
l0 = center distance,
y = workpiece height,
w = workpiece length,
x = coordinate dimension,
s = stroke,
z = stop diameter
Calculation dimension x:
y greater than or equal to l2 - d2/2,
then x = d2/2 - s
(value x for this case see table)
or
y smaller than l2 - d2/2,
then x = d2/2 - s - [(l2 - d2/2 - y) * 0,123]
RoHS compliant
Contains lead - compliant according to exceptions 6a / 6b / 6c.
Contains SVHC substances >0,1% w/w
Contains lead - SVHC list [REACH] as of 27.06.2024.
Contains Proposition 65 substances
Lead can cause cancer and reproductive harm from exposure
https://www.P65Warnings.ca.gov/
Free from Conflict Minerals
This product does not contain any substances designated as "conflict minerals" such as tantalum, tin, gold or tungsten from the Democratic Republic of Congo or adjacent countries.