22170.0105 - Spring Push Plunger
with mounting flange, horizontal
The spring push plungers are used for simple and secure positioning of workpieces or components on stops and support points.
The spring push plunger is designed with a thrust pad that can be rotated 4 x 90° depending on the application.
Below h2, a pull-down effect is created when the thrust pad is installed in the appropriate position.
This article 22170.0105 - Spring Push Plunger with mounting flange, horizontal / plunger wedge-shaped, smooth, standard spring load (b1: 22 mm, d1: 3.3 mm) is one variant of the article group Spring Push Plungers with mounting flange, horizontal (EH 22170.)
- plunger wedge-shaped, smooth, standard spring load – picture 2, Stainless steel
- b1: 22 mm
- d1: 3.3 mm
- b2: 16.5 mm
- b3: 7 mm
- b4: 10 mm
- h1: 4 mm
- h2 +0.5: 1 mm
- h3: 6 mm
- k1: 14 mm
- k2: 4 mm
- k3: 8 mm
- k4: 4.5 mm
- l1: 2.8 mm
- l2: 4.8 mm
- l3: 2.4 mm
- Stroke s: 2.8 mm
- Hexalobular socket: 10
- Spring load1) F1: 8 N
- Spring load1) F2: 11 N
- Weight: 12 g
Material
Body
- Zinc die-cast, plastic coated, black, similar to RAL 9005, matt structure
Thrust Pad
- Stainless steel 1.4542
Screw
- Stainless steel A2
Spring
- Stainless steel 1.4310
Assembly
Assembly by means of washers ISO 7092.
RoHS compliant
Compliant according to Directive 2011/65/EU and Directive 2015/863.
Does not contain SVHC substances
No SVHC substances with more than 0.1% w/w contained - SVHC list [REACH] as of 27.06.2024.
Does not contain Proposition 65 substances
No Proposition 65 substances included.
https://www.P65Warnings.ca.gov/
Free from Conflict Minerals
This product does not contain any substances designated as "conflict minerals" such as tantalum, tin, gold or tungsten from the Democratic Republic of Congo or adjacent countries.