Vertical Toggle Clamps with vertical base and solid support arm
EH 23330.
Due to their favourable power to movement ratio and their easy action the toggle clamps are versatile applicable for a wide rang of uses.
These toggle clamps can be used in the metal working industry when drilling, welding, bending, grinding, testing and fitting as well as in the wood and plastic industry in glueing, drilling, cutting and milling jigs.
The "toggle" principle of the toggle clamp allows a large and quick opening of the clamp. If unclamped the workpieces are completely cleared for unimpeded removal. The large power transmission results maximum clamping force by low hand force. The clamps are self-arresting they remain locked, resisting the force produced when machining components.
The toggle clamps are manufactured from high quality components and are designed for maintenance-free continuous use.
An oil resistant ergonomic 2-component handle, with slip-proof, soft surface and large grip area for high ease of use.
Your selection resulted in 4 hits
More details
- Steel
- Nominal size: 4
- Clamping screw: M8 x 45 mm
- d1: 7.5 mm
- b1: 27 mm
- b2: 6 mm
- b3: 6 mm
- h1: 200 mm
- h2: 48 mm
- h3: 18 mm
- h4 min.: 14.5 mm
- h4 max.: 26 mm
- h5: 41 mm
- l1: 108.5 mm
- l2: 116 mm
- l3: 81 mm
- l4: 19.5 mm
- l5: 43 mm
- l6: 7.5 mm
- l7: 20 mm
- l8: 40 mm
- Holding force F1: 1.4 kN
- Holding force F2: 2.5 kN
- α: 105°
- Operating temperature range min.: -10 °C
- Operating temperature range max.: 80 °C
- Weight: 426 g
- Steel
- Nominal size: 5
- Clamping screw: M8 x 65 mm
- d1: 8.6 mm
- b1: 34 mm
- b2: 8 mm
- b3: 8 mm
- h1: 244 mm
- h2: 65 mm
- h3: 20 mm
- h4 min.: 13 mm
- h4 max.: 44 mm
- h5: 55.5 mm
- l1: 141.5 mm
- l2: 129.5 mm
- l3: 101 mm
- l4: 17 mm
- l5: 61 mm
- l6: 13 mm
- l7: 32 mm
- l8: 53 mm
- Holding force F1: 2 kN
- Holding force F2: 3 kN
- α: 105°
- Operating temperature range min.: -10 °C
- Operating temperature range max.: 80 °C
- Weight: 679 g
- Steel
- Nominal size: 6
- Clamping screw: M12 x 80 mm
- d1: 8.5 mm
- b1: 36 mm
- b2: 10 mm
- b3: 10 mm
- h1: 302 mm
- h2: 77 mm
- h3: 25 mm
- h4 min.: 15 mm
- h4 max.: 47 mm
- h5: 66 mm
- h6: 64 mm
- l1: 196.5 mm
- l2: 184 mm
- l3: 141 mm
- l4: 30.5 mm
- l5: 88 mm
- l6: 9.5 mm
- l7: 45 mm
- l8: 65 mm
- Holding force F1: 3 kN
- l9: 26.5 mm – 31.5 mm
- Holding force F2: 5 kN
- α: 115°
- Operating temperature range min.: -10 °C
- Operating temperature range max.: 80 °C
- Weight: 1506 g
- Steel
- Nominal size: 7
- Clamping screw: M12 x 110 mm
- d1: 13 mm
- b1: 39 mm
- b2: 10 mm
- b3: 10 mm
- h1: 369 mm
- h2: 117 mm
- h3: 30 mm
- h4 min.: 28.5 mm
- h4 max.: 86.5 mm
- h5: 102 mm
- l1: 232 mm
- l2: 206 mm
- l3: 165.5 mm
- l4: 20.5 mm
- l5: 90 mm
- l6: 24.5 mm
- l7: 50.5 mm
- l8: 90 mm
- Holding force F1: 3.5 kN
- Holding force F2: 5.5 kN
- α: 140°
- Operating temperature range min.: -10 °C
- Operating temperature range max.: 80 °C
- Weight: 2000 g
Material
Clamp
- Steel, zinc-plated by galvanization, passivated
Rivet
- Stainless steel
Handle
- plastic
Clamping screw
- Steel, tempered, zinc-plated by galvanization
Clamping cap
- Rubber, black
Assembly
The clamping screw must be welded to the support arm in the desired position.
RoHS compliant
Compliant according to Directive 2011/65/EU and Directive 2015/863.
Does not contain SVHC substances
No SVHC substances with more than 0.1% w/w contained - SVHC list [REACH] as of 27.06.2024.
Does not contain Proposition 65 substances
No Proposition 65 substances included.
https://www.P65Warnings.ca.gov/
Free from Conflict Minerals
This product does not contain any substances designated as "conflict minerals" such as tantalum, tin, gold or tungsten from the Democratic Republic of Congo or adjacent countries.