Eccentric Clamps
EH 23271.
The eccentric clamp allows clamping with pull-down effect on different workpiece forms at low height.
Your selection resulted in 7 hits
d1 [mm]
d2 [mm]
l2 [mm]
Clamping force max. [kN]
More details
Article-No.
CAD / Documents
Price
[$]
Available
d1 [mm]:
M3
d2 [mm]:
6.7 mm
l2 [mm]:
2 mm
Clamping force max. [kN]:
0.05 kN
Article-No.:
23271.0003
- d1: M3
- d2: 6.7 mm
- l1: 6 mm
- l2: 2 mm
- s1: 3.5 mm
- s2: 2.9 mm
- s3: 2.2 mm
- L1: 3 mm
- L2: 3 mm
- L3 ±0.2: 3.2 mm
- WS: 2 mm
- Clamping force max.: 0.05 kN
- Tightening torque max.: 1 Nm
- Weight: 0.6 g
d1 [mm]:
M4
d2 [mm]:
8.7 mm
l2 [mm]:
3 mm
Clamping force max. [kN]:
0.09 kN
Article-No.:
23271.0004
- d1: M4
- d2: 8.7 mm
- l1: 8 mm
- l2: 3 mm
- s1: 4.6 mm
- s2: 4 mm
- s3: 3 mm
- L1: 4 mm
- L2: 3.5 mm
- L3 ±0.2: 4.2 mm
- WS: 2.5 mm
- Clamping force max.: 0.09 kN
- Tightening torque max.: 1.5 Nm
- Weight: 1.4 g
d1 [mm]:
M5
d2 [mm]:
10.9 mm
l2 [mm]:
4 mm
Clamping force max. [kN]:
0.1 kN
Article-No.:
23271.0005
- d1: M5
- d2: 10.9 mm
- l1: 10 mm
- l2: 4 mm
- s1: 5.7 mm
- s2: 5 mm
- s3: 3.5 mm
- L1: 5 mm
- L2: 4.2 mm
- L3 ±0.2: 5.2 mm
- WS: 3 mm
- Clamping force max.: 0.1 kN
- Tightening torque max.: 2 Nm
- Weight: 2.8 g
d1 [mm]:
M6
d2 [mm]:
13.5 mm
l2 [mm]:
5 mm
Clamping force max. [kN]:
0.3 kN
Article-No.:
23271.0006
- d1: M6
- d2: 13.5 mm
- l1: 12 mm
- l2: 5 mm
- s1: 7.1 mm
- s2: 6.1 mm
- s3: 4.5 mm
- L1: 6 mm
- L2: 5.4 mm
- L3 ±0.2: 6.4 mm
- WS: 4 mm
- Clamping force max.: 0.3 kN
- Tightening torque max.: 4.5 Nm
- Weight: 4.9 g
d1 [mm]:
M8
d2 [mm]:
16.9 mm
l2 [mm]:
6 mm
Clamping force max. [kN]:
2.7 kN
Article-No.:
23271.0008
- d1: M8
- d2: 16.9 mm
- l1: 16 mm
- l2: 6 mm
- s1: 8.9 mm
- s2: 7.7 mm
- s3: 5.5 mm
- L1: 8 mm
- L2: 6.6 mm
- L3 ±0.2: 8 mm
- WS: 5 mm
- Clamping force max.: 2.7 kN
- Tightening torque max.: 20 Nm
- Weight: 11 g
d1 [mm]:
M10
d2 [mm]:
20.9 mm
l2 [mm]:
7 mm
Clamping force max. [kN]:
4 kN
Article-No.:
23271.0010
- d1: M10
- d2: 20.9 mm
- l1: 20 mm
- l2: 7 mm
- s1: 11.1 mm
- s2: 9.4 mm
- s3: 6.5 mm
- L1: 10 mm
- L2: 8.3 mm
- L3 ±0.2: 9.8 mm
- WS: 6 mm
- Clamping force max.: 4 kN
- Tightening torque max.: 30 Nm
- Weight: 20 g
d1 [mm]:
M12
d2 [mm]:
26.1 mm
l2 [mm]:
9 mm
Clamping force max. [kN]:
5.4 kN
Article-No.:
23271.0012
- d1: M12
- d2: 26.1 mm
- l1: 24 mm
- l2: 9 mm
- s1: 13.5 mm
- s2: 11.6 mm
- s3: 8 mm
- L1: 12 mm
- L2: 10.1 mm
- L3 ±0.2: 12 mm
- WS: 8 mm
- Clamping force max.: 5.4 kN
- Tightening torque max.: 44 Nm
- Weight: 35 g
Material
- Case-hardened steel, case-hardened and blue zinc-plated
Assembly
- Manufacture a thread with the corresponding distance L2 / L3 to the workpiece.
- Screw in the eccentric clamp at the necessary height and set it relative to the workpiece with its flat side.
- Insert the workpiece and tighten the clamping pin using the internal hexagon. The proper tension is achieved after approx. 1/3 turn.
The threaded hole must be lubricated on a regular basis.
The rotational movement during tightening must always be completed towards the stops in order to prevent the workpiece from turning away from the stops.
Contains lead - compliant according to exceptions 6a / 6b / 6c.
Contains SVHC substances >0,1% w/w
Contains lead - SVHC list [REACH] as of 27.06.2024.
Contains Proposition 65 substances
Lead can cause cancer and reproductive harm from exposure
https://www.P65Warnings.ca.gov/